Refashioning a 1980’s Dress into a 1940’s Pinafore
Do you ever have an idea of a project, and then when you do it, for one reason or another it doesn’t turn out anything like the original plan?
I got this dress a few years ago (yes. . . years) from the thrift store, with the thought that I would refashion it into something a little less “1980’s bag lady”. However, time went on, and I could never quite figure out what to do with it, as there never seemed to be enough material to do anything with. I loved the gingham print, though, and the fabric was rayon, which I would much rather prefer to the poly/cotton blends that all gingham seem to come in. So, I didn’t give up on it, and finally, a few weeks ago, when the canola was in full bloom and I needed something to wear in the field, this gingham came to mind: it was the push to finally do something with it!
My first plan was a simple dress, like this sketch below. Simply remove the sleeves, dart the bodice in, hem it to knee length using the excess fabric from the hem to create a tie belt, and add some eyelet lace. It would be easy and simple and wouldn’t take too long.
(Something like this, minus the ruffles. I love the ruffles, but didn’t have enough fabric)
Yes. Well. Nothing in life is easy, and most definitely not refashioning garments. So, here I outline how I ended up, not with a sleeveless dress, but a pinafore instead. (And in the process, reveal all the wonky bits that didn’t turn out quite as nicely as I would’ve liked them to!) 🙂
The first step, was removing the sleeves and fitting the bodice. This was easily done, however there was a malfunction when I fit and cut the armscye. (Which, by the way, is the curve of the armhole, and is pronounced arms-eye. In case you didn’t know that already. I didn’t know that for the longest time and was going around tongue twisting “arm-sky”, or “arm-sis”, which are not correct in the least. So, now I have saved you embarrassment, or maybe I have just embarrassed myself, I’m not sure which.) I cut the new armscye shape, and the cloth shifted when I cut it, and it ended up too low on one side. . . and so basically the bodice was ruined. Ooops.
So, now that the armhole on one side was too low, I wasn’t sure what to do. I thought about it for a while, and then decided that gingham would be perfect for a pinafore, as a pinafore doesn’t have armholes anyways. So, on to plan B!
I was looking through some of my sewing books, and through some vintage blogs. I came across the picture above of a yellow gingham pinafore style dress which I liked, from one of my sewing books, and I also remembered this dress from that Solanah of Vixen Vintage wore a few years back that I had on my list of ‘dresses to make”, and I thought that I could make this dress work.
I ended up picking apart the bodice on the sides, and detaching it from the skirt, so I had two flat pieces to work from, rather than a partially constructed bodice (as that had already been proven to lead to disaster). Once I had the two pieces flat, I cut the neckline straight down at an angle, basically just cutting out the rounded corners, measuring each side to make sure they were even. (The straps were 2″ wide.)
Then, I cut out the new sides, leaving 4 inches up from the waist, which would form a fake “waistband’ on the side. I cut it at 4″, which allowed for 1/2 seam allowances on top and bottom for a finished 3” side panel. Remember to leave seam allowances for all of your seams. With this project I used 1/2 inch as I didn’t have much fabric to work with. For reference, the finished bib width is 13 1/2″ at the outer top edge of the straps, and is 9″ wide at the bottom (where to the two yellow lines form a right angle in the diagram above).
I left the side pieces as a waistband, even though most pinafores don’t have a side panel. A few years ago I sewed a pinafore and it ended up looking so much like an apron that I actually ended up turning it into an apron. For the longest time I couldn’t quite place my finger on why it looked like an apron instead of a dress, and I have come to the conclusion that it is because the sides were completely removed. By leaving a couple of inches, it gave some structure for the skirt, and it looked more like a dress. Because even though a pinafore is an apron, I don’t really want people to think that I am actually wearing an apron.
After I had finished cutting the bodice pieces, I traced the shape and cut out two pieces of lining fabric, lining the entire bodice so that all the seams would be encased.
(This refashioned dress I made a few years ago, used the same technique as I did for this one, only instead of cutting the sides and neckline square, I curved them, so you can see how you could use this technique for a different style of dress)
Once the bodice was finished, it was time to attach the skirt. At this point, I discovered that the fabric had, over time, stretched out of shape, and the front button placket no longer hung straight. I also discovered that when the fabric had initially been cut, it was cut off grain. This was noticeable as the gingham pattern revealed the fact, but there wasn’t much I could do to square it up, without sacrificing too much material. So, I left it: I wasn’t concerned that it would shrink, as it was a pre-owned and washed garment. I made the decision to remove the button placket on the skirt and just leave the four decorative buttons on the bodice. Once the skirt was gathered and sewn to the bodice, I inserted a side invisible zipper. I would have liked to have used a white zipper, but I did not have one and the local store doesn’t sell invisible zips. So, I used a navy zipper, which worked out ok- it’s on the side anyways, so is not super visible. I was really in a “it’s now or never” state of mind at that point (two days in). If I had to place the dress to the side, I don’t think I would have finished it, with the amount of frustrations I had already had with it. That, and the canola was in full bloom, and I needed the dress now, not next week when it would be too late!
Now the dress was almost done, and needed only to be hemmed and lace attached at the bottom. This was the part where I was tempted to cry tears of frustration. Remember how I said that the cloth had stretched and warped over time? Well, it was completely out of whack, and I couldn’t straighten it along the pattern. I tried measuring down, I tried measuring from the edge, and every time I pinned it, it was crooked and hung down in the back or the side. And nothing makes a garment look worse than a crooked hem. (Unless I suppose it is a train, and is done on purpose, which in that case is great!) Finally, after pulling out all my hair (oh and did I mention that I was doing this at 12:00 at night?) I decided to measure up from the floor, like those hem markers do. I placed the dress on my mannequin and measured up with a yardstick, pinning and pressing it into place to see if it worked- and it did! So, as you can see the hem does not follow the pattern of the gingham, but it is straight from the floor! And as long as I stand on level ground it will be so 😉 I decided that I would rather have a straight hem, than worry about the pattern of the fabric, and as it is at the hem, no one is going to notice it anyways. Well, I guess now you will. Oops.
The last step was attaching the lace to the hem, adding the pocket, and then changing the buttons to white, as the other ones looked a bit dingy with age. I made the pocket out of one of the sleeves, and edged with the same eyelet. There were originally supposed to be two pockets, but the measurement was off, and it would have run over the zipper. So, I decided the dress was good with just one pocket, and called it done! I placed the pocket at an angle, as the fabric squares wouldn’t line up, and also so you could see it on such a busy background.
Whew. Somehow this project rapidly went from a quick and easy alteration, to three days of tears and frustration! But, it worked, and I am satisfied with it, as it turned out looking a lot like the 1940’s style pinafores. And, for all of the headache it caused, I love that my “new” dress is also keeping one more garment out of the textile waste cycle.
(Oh, and we got the pictures in the canola field too, which is why I started this whole escapade in the first place!)
Do you ever start projects and have to change to plan B, C or D partway through?
Do you like refashioning garments, or would you rather start from scratch?
